DATA AND COMMUNICATIONS CABLES - LiYY-TP
LiYY (TP) is applicable in the short runs and tight spaces, where the main requirements are smaller outer diameter and bending radii. The cable ideally meets these requirements.
Standard: Based on VDE 0812
Voltage Grade (Not for power installation): 0.14 mm² = 350 V; >/= 0.25 mm² = 500 V
Insulation Resistance: Min. 20 GΩ x cm
Temperature Range: Flexing -5°C to +70°C. Fixed installation -30°C to +70°C
Minimum Bending Radius: For flexible use 10 x cable ø
Test Voltage: Up to 0.25 mm² = 1200 V. From 0.34 mm² = 2000 V
Breakdown Voltage: Up to 0.25 mm² = 2400 V From 0.34 mm² = 4000 V
Mutual Capacitance (approx.): Up to 0.5 mm² - 120nF/km Above 0.5 mm² - 160nF/km
Inductance: Approx. 0.65mH/km
Bare copper, fine wire conductors stranded according to DIN VDE 0295
Conductor make-up for
0.14 mm² = 18 x 0.10 mm.
0.25 mm² = 14 x 0.15 mm.
0.34 mm² = 19 x 0.15 mm.
Core insulation of special PVC TI2 EN 50363-3.
Core colours as per DIN 47100 (Refer table no. 2-1).
Pairs stranded in layers with optimal lay-length.
Plastic foil wrapping over laid up pairs.
Outer sheath of special PVC, TM2 to EN 50363-4.1.
Colour grey (RAL 7032).
PVC self-extinguishing and flame retardant according to EN 60332-1-2.
People who bought this product, also bought